Manual Squeegee Washing Basin
made of aluminium, with steel support, solvent filter tank, pump, hose and washing brush, incl. cover for protection during periods of non-use, with on/off switch, without exhaust ventilation, suitable for manual washing of squeegees up to 130cm (total length 150cm), used, good condition. Exhaust ventilation optionally available.

Manual screen washer made of galvanized plate, 110x120
with solvent tank, pump, hose and washing brush, with exhaust ventilation, suitable for max. screen size 110x120cm, older model, in working condition.

Manual Screen Washer, made of galvanized plate, 140x170
with solvent tank, pump, hose and washing brush, complete with exhaust ventilator, suitable for max. screen frames of approx. 140x170cm, outer dimensions: approx. 200cm wide x 70cm deep x 190cm high, older model, working, medium condition

Manual screen washer made of aluminium, 140x180
with solvents tank, pump, hose and washing brush, with exhaust ventilation, for max. screen size 140 x 180 cm, unused demonstration model, as good as new, special price.

Manual screen washer made of stainless steel, 150x180
for max. screen frames 150 x 180 cm, o.d. approx. 210 cm wide x 90 cm deep x 230 cm incl. support, complete with solvents tank, pump, hose and washing brush, with exhaust pipe and ventilator. Used, older model, will be completely checked and partly overhauled, will then be in good condition.

Manual screen washer made of aluminium, 175x360
with solvents tank, pump, hose and washing brush, complete with exhaust ventilator and time lag switch, suitable for max. screen frames approx. 175 x 360 cm, o.d. approx. 380 cm wide x 80 cm deap x 230 cm high incl. support. The switch box belonging to the unit is not ex-proof and, corresponding with the prescriptions, must be placed in a distance of at least 5 m from the unit, or separated from the unit by a fireproof wall.

Manual squeegee washing unit, up to 165cm
made of aluminium, with solvents tank, pump, hose and washing brush, suitable for manual washing of squeegees (on end) up to 165 cm, or may be screen frames up to a width of approx. 70 x 160 cm (on end). Basin width approx. 90 cm, depth approx. 70 cm, total height approx. 220 cm.

Automatic Stencil Washer DSW, Made of Aluminium, 140x180
completely made of aluminium, can be loaded from the front, suitable for inserting of 2 screen frames with a max. size of 140x180cm, with oscillating spray can system, various washing programmes, complete with docked solvent filtration unit as well as an exhaust system. Unit completely ex-protected, older model, functioning. Without complete overhauling: EUR 4,500.--, unit checked and partly overhauled: EUR 8,500.--

Automatic screen washer
model SPS-AUTOJET W/E 140x180
Vertical unit for cleaning the screen frames from ink, with intermediate dripping/drying station, decoating unit with high-pressure nozzles, suitable for screen frames 140 x 180 cm (depositing on flat edge), complete with distilling unit with fresh water tank. With water and chemicals recycling unit. Year of construction approx. 1990, in operation until 2 years ago, actually disassembled, should be completely overhauled. Price ex place. Dimensions of washing cabin:
per cabin approx. 80 cm wide x 200 cm deep x 220 cm high
distilling and water recycling unit: 200 cm deep x 300 cm wide x 200 cm high.

Automatic screen washer
model SPS-AUTOJET W/E 150x178
Vertical unit for cleaning the screen frames from ink, with intermediate dripping/drying station, decoating unit with high-pressure nozzles, suitable for screen frames 150 x 178 cm (depositing on edge), complete with distilling unit with fresh water tank. With water and chemicals recycling unit. Year of construction approx. 1990, in operation until 2 1/2 years ago, actually disassembled, should be completely overhauled. Price ex place. Dimensions of washing cabin: per cabin approx. 80 cm wide x 180 cm deep x 255 cm high
distilling and water recycling unit: 180 cm deep x 260 cm wide x 220 cm high.

  3.500 €

  3.850 €

  1.900 €

FLEXA Laminator EASY LITE 160, Demonstration Model
laminator for large formats, fast and easy to use, suitable for cold laminating, for concealing of pictures and plates, working width: 1600mm, roll distance: up to max. 30mm, rubber pressure roller ø115mm, with heating upper roller, proof manually adjustable, automatic roll holder incl. brake and clutch system, electronically adjustable speed, completely with foot pedal, 230V, 50Hz, special price.

Manual hand-cutting device, cutting length: 100cm
with floor stand and roll holder, suitable for foil/paper, blade cutting device with hand stick, rarely used, very good condition

Manual hand-cutting device, cutting length 100cm
suitable for mounting at existing table, useable for cutting of leading and trailing edges, equipped with blade bar with grip stick, blade cartridge easily exchangeable, rarely used demonstration model, very good condition, special price

Manual hand-cutting device, cutting length: 100cm
suitable for mounting at existing table, useable for cutting the leading and trailing edge, equipped with blade track with grip stick, used, good condition

Cutting Device with Pneumatic Drive, 125cm
suitable for cutting of paper, foils and similar, cutting width: 125cm, with mechanic roll blank holder, equipped with blade track, blade cartridge easily exchangeable, cartridges with exchangeable blades, pneumatic drive via pneumatic foot pedal, for fixing at existing table, unused demonstration model, special price

FLEXA Roll Cutter TGE 1600
max. roll diameter 210 mm, roll inside diameter 76 mm or 3 inch connected load 230 volts, 50 cycle, standard version for roll axle 76 mm, unused demonstration model, special price

Foil cutting machine
model JOSTING FS 1500
machine for cutting foils, paper rolls, and similar materials, max. width 1460 mm, shear machine with additional longitudinal cutting equipment (3 longitudinal cutting knives), electronic dimensional setting and electronic quantity pre-selection, complete with 2 ionizing bars, additionally one longitudinal cutting equipment with circular knife at the roll stand, equipped with reception table, height and incline adjustable, for sheets 1500 mm long. Rarely used demo model, special price

Cutting machine POLAR 82 EL
cutting width 82 cm, with 2 spare blades, machine with mechanical dimensional adjustment, glass scale and visual telescope. Year of construction approx. 1970, technically o.k. and working, will be partly overhauled and then be technically and optically in medium to good condition (no actual professional association check for Germany)

Drag knife plotter
Summacut Pharos D60R-2E
table-top model, cutting width 60 cm, without stand, knife pressure adjustable from 0-400 g in 5 steps, incl. OPOS X position system for contour cutting, 1 pair of media/material flange, knife holder, 2 standard knives, 1 fibre pen, data cable USB and serial, Summa Cutter Control Software, Win Plot-Cutting Software (Plug-In for CorelDraw and Photoshop included), demonstration model, special price.

Squeegee grinder
model STANDARD, grinding length 130 cm
table-top model 380/400 V. Unused demonstration model, special price

Squeegee grinder
model STANDARD, grinding length 160 cm
table-top model 380/400 V. Unused demonstration model, special price

Screen rack, movable
for 10 screen frames with size of approx. 140x180cm, steel-tube construction, colour: orange, movable on casters, dimensions: approx. 105cm deep x 62cm wide x 160cm high, used, medium condition.

Screen storage stand
for 12 big size screen frames, galvanized sturdy models.

Screen rack, movable
suitable for 8 screen frames up to DIN A0, for frame profile 45 mm, steel-tube construction, light blue powder-coated, unused demonstration model, special price.

Screen Rack, special model
with 10 drawers for screens with a size up to 140x180cm, 5 drawers appr. 140x100cm, 5 drawers for smaller sizes. Screen frame profile 45mm, steel tube construction, with casters, used, medium condition.

Screen Rack, special model
two-high model, steel tube construction with round bars and zinc plate support for an easy input, suitable for 10 screens each at the bottom and at the top (20 screens) with a size of up to 120x135cm (flat input), outer dimension: ca. 70cm wide x 135cm deep x 260cm high. Varnishing: RAL 9002 grey-white. New models from an unsuccessful export order. Special price per piece. 2 pieces available.

All-steel drying rack
with 50 shelves with bars, size 60 x 90 cm, plastic coated in white, rarely used demonstration model.

Drying Rack,
model T&R, 85x125
with 75 galvanized shelves with rods and plastic spacer, base frame wiith casters, shelve size: 85x125cm, useable size: approx. 80x120cm, used, older model, working condition

All-steel drying rack, 100x140
50 galvanized shelves with wire mesh, size 100x140cm, blue vanished support with rubber casters, used, medium condition.

All-steel drying rack
model GS II, 90x128
with 50 shelves, size 90x12 cm, red plastic spacing bumpers, each 10th blue. Galvanized sturdy shelves with galvanized support. Rarely used, very good condition

All-steel drying rack
with 50 galvanized shelves with wires, size 60 x 90 cm, with rubber casters. Demonstration model, special price.

All-steel drying rack
model STABILO, 90x130
with 50 shelves, size 90 x 130 cm, white powder-coated shelves with rods, silver lacqued support with synthetic casters. Rarely used, very good condition. 2 pcs. available.

All-steel drying rack
model STABILO
with 50 shelves, shelves galvanized with rods, blue painted bench with plastic casters, size approx. 90 x 130 cm. Only rarely used demonstration models, condition as new, special price. Actually 4 pcs. available. (Actual price for new rack 1.430,00 €)

All steel drying racks, 90x130
with 50 shelves, galvanized shelves with wires, complete with casters, size approx. 90 x 130 cm. Unused demonstration models, special price per piece

All-steel Drying Rack,
model DWO
with 50 shelves, special version: shelves frame covered with screen printing mesh, suitable to place special and small parts, galvanized support with custers, size: 90x130cm, shelves partly damaged.

All-steel Drying Rack,
model DWO, 90x130
50 galvanized shelves with wire mesh, size approx. 90x130cm, used, older model, medium condition.

All-steel drying racks
with 50 shelves, galvanized shelves with wire mesh, with support and casters, size 100 x 140 cm. Unused demonstration models, special price/pc.

All-steel Drying Rack,
model STABILO 100x140
50 galvanized shelves with bars, size: appr. 108x148cm, blue varnished base frame with synthetic casters, new frame, bars partly with badly galvanisation, special price.

All-steel drying racks
with 50 shelves, galvanized shelves with wires, with casters, useable size 100 x 200 cm. Unused demonstration models, special price per piece

Jogging Table Model GLASS, 43x43cm,
dimension up to max. 43x43cm, sturdy monopod model with vibrating motor, older model, working condition.

Vibrating Table 70x100,
for sheet size of approx. 70x100cm, with adjustable vibrating motor (230V), adjustable inclinging possibility, with adjustable stop plates, base plate made of natural hardwood approx. 80x110cm, older model, working, medium condition

Vibrating table for sheet size approx. 100 x 140 cm,
with adjustable vibrating motor (380/400 volts), angular adjustable, with adjustable stop plates, base plate made of approx. 3 cm natural hardwood, movable on casters. Older model, working, medium condition

Vibrating table
for sheet size 125 x 200 cm,
with adjustable vibrating motor, adjustable tilt, movable on casters. Older model, working condition.

Sheet trap 70 x 100 cm
simple wooden sheet trap, movable on casters, to be placed at a drying channel.

Pneumatic screen stretching device
equipped with 10 stretching clamps each 25 cm wide, suitable for screen frames approx. 50 - 60 x 70 - 80 cm, complete with connecting hoses, distribution ledge and operation panel, without table. Rarely used demonstration model, special price

Screen stretching machine model GRÜNIG G-280, 2,4x5,8
electro-mechanical stretching device with clamps, suitable for max. screen frames approx. 240 x 580 cm (mesh size 260 x 600 cm). Used, year of construction 1999, technically o.k. and working, medium to good condition.

Screen stretching machine HARLACHER H 28-6
electro-mechanical clamp stretching device, suitable for max. screen frames approx. 240 x 440 cm (stretching area 260 x 450 cm), motor driven stretching bars, sturdy stretching clamps. Suitable for simultaneously stretching of one or several stencils in one working process. Year of construction 2003, technically and optically medium to good condition.

Flock cabin model BORCHERT & MOELLER FT 100/80
with collect funnel, incl. flock device. Technically o.k., good condition.

Ink Mixing Unit, Model PENDRAULIK TRV03
sturdy tripod construction (standing unit) with counterweight and chain, suitable for containers of up to approx. 30l, with mechanical speed drive for various speed levels, 380/400 V, ex-protected model with ex-switch, used, older model, functioning, medium condition.

Screen Clamps without height-adjustment
galvanized, rarely used, special price per pair

Screen Clamps with 5 cm height-adjustment
suitable for existing table, demonstration model, special price per pair

Parts spraying cabin with exhaust
useable size approx. 110 x 130 x 100 cm, with ex-proof illumination, overall dimensions approx. 150 x 150 x 205 cm. Older model, working condition.

Spraying cabin for parts with exhaust
useable size approx. 110 cm wide x 90 cm high x 80 cm deep, with exhaust ventilator. Older model, working, medium condition

Corner Rounding Gadget Model 50 B
sturdy table-top device with hard wood depositing plate, complete with 3/8" blade. Demo model, special price

MIRUS sheet stacker
max. sheet size 130 x 160 cm, working in longitudinal direction, older model, in working order.

MIRUS sheet stacker UN II (heavy model)
suitable for max. sheet size approx. 145 x 185 cm. Used, working, medium to good condition

Pic01.jpg

Pic02.jpg

Seal tank
for example for aluminium signs, basin made of stainless-steel, with electric heating, dimensions approx. 150 x 40 x 90 cm high. Older model, working condition

Dipping and decoating basin, made of steel
completely with drain cock and stand, outside dimension 168 cm long x 58cm wide x 112cm high, inner dimension 162cm long x 50cm wide x 90cm high, working, medium condition.

Squeegee/Coating channeling holder
1 pair, suitable for 9 squeegees resp. scoop coaters, used

Squeegee Holder for Wall Mounting
for depositing 10 Alfa-Serimat squeegees, used. 3 pcs. available.

Manual Can Press, manual level press for wall installation
(sturdy wall for dowel necessary), for pressing of cans and pots with a capacity up to 5litre, easy to use, unused demonstration model, special price.

Circular Saw ALTENDORF,
model WA6
for plastic laths and wood jobs, very compact unit with highly precise cutting quality and flexibility, completely equipped with effective additional suction unit, has been used so far in the decoration field for plastic plates, about 2 yrs. old, very good, nearly new condition. Total price:

Compressor
model JUN-AIR OF302-25 Silver-Line
suction power 108 l/min., tank 25 litre, 230V, 50-60Hz, demonstration model.